SHINWA pick up ruler 15cm 30cm
Related Products
SHINWA minisukoya TRY square Brass
SHINWA minisukoya TRY square Brass
¥1,495
Shinwa TRY Square 4.5 cm, 6 cm, 7.5 cm, 9 cmMade of stainless steel and brass. Size 4.5 cm 62020 : 45 mm x 40 mm x 6 mmWeight : about 25 gramsAccuracy : ± 0.04 mm or less per 45 mm Size 6 cm 62021 : 60 mm x 45 mm x 6 mmWeight : about 30 gramsAccuracy : ± 0.06 mm or less per 60 mm Size 7,5 cm 62022 :75 mm x 52 mm x 6 mmWeight : about 45 gramsAcc...
SHINWA Square Layout Miter 45 + 90 Degrees 62113
¥1,895
Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable. Made in Japan.
Marking gauge Kebiki with 2 blades
¥2,795
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
SHINWA precision Try Square 62009
¥1,995
Shinwa Try square 62009. Well deep-etched readable metric graduation on both sides.Size : 175 mm x 100 mm x 8 mmWeight : about 110 grams Accuracy : ± 0.1 mm or less per 100mmMade of stainless steel.
SHINWA Square Layout mitre 45 + 90 Degrees 62081
¥1,895
Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 100 mm x 15 mmWeight : about 220 gramsMade of stainless steel.
SHINWA sliding angle bevel 150mm 250mm
SHINWA sliding angle bevel 150mm 250mm
¥1,395
Shinwa 150 mm 250 mm sliding bevel 150mm 62588 : Size : 182 mm x 14 mm x 20 mmWeight : about 110 grams 250mm 62596 :Size : 250 mm x 19 mm x 20 mmWeight : about 200 gramsMade of stainless steel.
Marking gauge small Kebiki with 2 blades
¥3,195
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
SHINWA 11215 Framing Square 30cm
¥2,995
Shinwa Framing square 11215 Well deep-etched readable graduation on both sides.Outside : 300 mm x 150 mmInside : 250 mm x 100 mm Accuracy : ± 0.1 mm or less per 100 mmTotal size : 320 mm x 160 mm x 2 mmWeight : about 140 gramsMade of stainless steel.Made in Japan.
SHINWA Protractor No.19 20cm Stainless steel 62490
¥1,795
Shinwa 62490 20 cm protractor.Size : 198 mm x 50 mm x 15 mm⦰90 mmWeight : about 80 gramsMade of stainless steel.
SHINWA 150mm caliper ruler 0.05mm 19899
¥4,895
Shinwa 15cm caliper 19899 0-150 mm with a precision of :± 0,05 mm from 0 to 50 mm± 0,06 mm from 50 to 100 mm± 0,07 mm from 100 to 200 mm Size : 235 mm x 75 mm x 7 mmWeight : about 150 gramsMade of stainless hardened steel.
SHINWA sliding angle bevel 30cm 62660
¥4,695
Shinwa 30 cm sliding bevel 62660. Lock the desired angle and transfer it easily from one piece to another. You can also use it as a saw guide.It open to the right and to the left.Degrees scale and metric scale. Size (closed) : 350 mm x 30 mm x 28 mmWeight : about 270 gramsMade of aluminum. Made in Japan.
SHINWA 150mm moulage gauge model 77970
¥1,795
Japanese 150 mm Shinwa moulage gauge profile contour profile templates 77970.This is the small model. Size : 150 mm x 84 mm x 18 mmWeight : about 230 gramsNeedles : 84 pieces x 0,8 mm (84 mm long)Maximum size you can copy : 148 mm x 49 mm Made in Japan.
