Featured products
SHINWA Square Layout Miter 45 + 90 Degrees 62113
435.00TL
Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable. Made in Japan.
KAKURI Hatagane Brass bar clamps
344.00TL
Japanese KAKURI brass bar clamps for fine and precise clamping, fitting and glueing small scale work. 150 mm :Bar dimension : 150 mm x 4 mm x 4 mmClamping width : 125 mmClamping depth : 13 mmWeight : 46g 180 mm :Bar dimension : 180 mm x 4 mm x 4 mmClamping width : 155 mmClamping depth : 13 mmWeight : 50g240 mm :Bar dimension : 240 mm x 5 mm x ...
SHINTO wood rasp planer file L 250mm Medium + Coarse 10"
825.00TL
Shinto 250 mm wood sawrasp E2101.Total length : 390 mm (15.4")Wide : 3 cm (1.2")Weight : 230 grams The rasp has 2 sides with different grits, one medium and one coarse :- Coarse side : 10 ppi (teeth per inch)- Medium side : 24 ppi (teeth per inch) Thanks to their grid shape, they offer high efficiency and no fouling. Non-slipping elastomer ...
Convex compass plane sori dai kanna 24mm
1,376.00TL
Japanese Fujiwara Sangyo Umebachi Ryūma convex compass plane. Those 2 spoon bottom convex wood planes are suitable for hollowing curved and concave surfaces. Sori-Dai-Kanna : 24 mm straight bladed convex compass plane with a sole curved along the length. (used for smoothing concave edges). The edge of the 24 mm blade is straight. (cutting width...
Set of 11 SENKICHI Chisel oire nomi Yasugi Steel
10,325.00TL
Set of 11 Japanese SENKICHI wood chisels.They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm, 42 mm.Chisels are about 23 cm long (9"). 3 mm : 85 grams 6 mm : 90 grams 9 mm : 110 grams12 mm : 120 gr...
Razorsaw Gyokucho DOZUKI saw 370 240mm + spare blade
1,789.00TL
High quality japanese Dozuki saw 370 Razorsaw Gyokucho 240 mm + 1 spare blade Blade length : 240 mm (9.4")Overall length : 600 mm (23.6")Blade thickness : 0,3 mm Kerf : 0,46 mmPitch : 1 mm (TPI : 25.4)Cutting range : 55 mm deepWeight : 220 grams Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. Ide...
Set 9 japanese Tōgyū Chisels oire nomi
6,424.00TL
Set of 9 Japanese Tōgyū oire nomi wood chisels.Laminated carbon steel. Size : 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mmChisels are about 23 cm long (9"). 6 mm : 90 grams 9 mm : 100 grams12 mm : 110 grams15 mm : 130 grams18 mm : 135 grams21 mm : 150 grams24 mm : 170 grams30 mm : 190 grams36 mm : 210 grams They are very wel...
Hand-forged 15mm Kiridashi carving marking chisel
1,376.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 15 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 42 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Chisel sharpening whetstone King #1000 #4000
527.00TL
King chisel whetstones :#1000 + #4000For an optimal result, I recommend the 2 grains of stones. With the large and the small stones, you should be able to sharpen almost any shape of chisel.Size of the main stone : 107 mm x 65 mm x 15 mm (4.2" x 2.6" x 0.6")Weight : 220 grams Size of the small stone : 65 mm x 33 mm x 9 mm (2.6" x 1.3" x 0.4")...
Set of 6 SENKICHI Chisel oire nomi Yasugi White paper Steel
8,604.00TL
Set of 6 Japanese hand forged SENKICHI Oirenomi wood chisels.They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made from laminated Hitachi Yasugi No.2 White paper Steel. Size : 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 30 mm.Chisels are about 23 cm long (9"). 6 mm : 90 grams 9 mm : 100 grams12 mm : 110 gr...
TORIBE kitchen scissors stainless KS-203
2,294.00TL
Toribe scissors KS203 for the kitchen and household.You can cut herbs salads, spices, thin bones, fish.... but also carton, paper, thin leather....Those scissors are very sharp and made of hardened stainless steel.Size : 200 mm long (7.9") and 75 mm wide (3")Weight : 115 gramsThe 2 blades can be easily and quickly separated just by openening th...
MOKUBA C-7 360mm Pry nail puller cat's paw
550.00TL
Japanese MOKUBA C-7 cat's paw 360 mm (14.2") claw bar Weight : 700 gramsTotal length : 360 mm (14.2")The back of the head also functions as a small tack hammer to easily grab the nails.The bar is made of forged hardened steel.Made in Japan.
