Set 3 SHINWA sliding angle bevel 30cm 45cm 60cm
Related Products
SHINWA minisukoya TRY square Brass
SHINWA minisukoya TRY square Brass
R 179.00
Shinwa TRY Square 4.5 cm, 6 cm, 7.5 cm, 9 cmMade of stainless steel and brass. Size 4.5 cm 62020 : 45 mm x 40 mm x 6 mmWeight : about 25 gramsAccuracy : ± 0.04 mm or less per 45 mm Size 6 cm 62021 : 60 mm x 45 mm x 6 mmWeight : about 30 gramsAccuracy : ± 0.06 mm or less per 60 mm Size 7,5 cm 62022 :75 mm x 52 mm x 6 mmWeight : about 45 gramsAcc...
SHINWA Square Layout Miter 45 + 90 Degrees 62113
R 227.00
Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable. Made in Japan.
Marking gauge Kebiki with 2 blades
Marking gauge Kebiki with 2 blades
R 322.00
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
SHINWA precision Try Square 62009
SHINWA precision Try Square 62009
R 239.00
Shinwa Try square 62009. Well deep-etched readable metric graduation on both sides.Size : 175 mm x 100 mm x 8 mmWeight : about 110 grams Accuracy : ± 0.1 mm or less per 100mmMade of stainless steel.
SHINWA pick up ruler 15cm 30cm
SHINWA pick up ruler 15cm 30cm
R 84.00
Shinwa Pick up scale ruler with well deep-etched readable graduation. The silver-colored finish reduces reflection on the surface and makes it easy to read. The end of the ruler is bent for an easier pick up.Made of stainless steel with an accuracy of ±0,15 mm Size 15 cm 13131 : 175 mm x 15 mm x 0.5 mm Weight : about 10 grams Size 30 cm 13134...
SHINWA Square Layout mitre 45 + 90 Degrees 62081
R 227.00
Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 100 mm x 15 mmWeight : about 220 gramsMade of stainless steel.
SHINWA sliding angle bevel 150mm 250mm
SHINWA sliding angle bevel 150mm 250mm
R 167.00
Shinwa 150 mm 250 mm sliding bevel 150mm 62588 : Size : 182 mm x 14 mm x 20 mmWeight : about 110 grams 250mm 62596 :Size : 250 mm x 19 mm x 20 mmWeight : about 200 gramsMade of stainless steel.
SHINWA 11215 Framing Square 30cm
SHINWA 11215 Framing Square 30cm
R 358.00
Shinwa Framing square 11215 Well deep-etched readable graduation on both sides.Outside : 300 mm x 150 mmInside : 250 mm x 100 mm Accuracy : ± 0.1 mm or less per 100 mmTotal size : 320 mm x 160 mm x 2 mmWeight : about 140 gramsMade of stainless steel.Made in Japan.
Marking gauge small Kebiki with 2 blades
R 382.00
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
SHINWA Protractor No.19 20cm Stainless steel 62490
R 215.00
Shinwa 62490 20 cm protractor.Size : 198 mm x 50 mm x 15 mm⦰90 mmWeight : about 80 gramsMade of stainless steel.
SHINWA 150mm caliper ruler 0.05mm 19899
R 585.00
Shinwa 15cm caliper 19899 0-150 mm with a precision of :± 0,05 mm from 0 to 50 mm± 0,06 mm from 50 to 100 mm± 0,07 mm from 100 to 200 mm Size : 235 mm x 75 mm x 7 mmWeight : about 150 gramsMade of stainless hardened steel.
SHINWA sliding angle bevel 30cm 62660
R 561.00
Shinwa 30 cm sliding bevel 62660. Lock the desired angle and transfer it easily from one piece to another. You can also use it as a saw guide.It open to the right and to the left.Degrees scale and metric scale. Size (closed) : 350 mm x 30 mm x 28 mmWeight : about 270 gramsMade of aluminum. Made in Japan.
