Hammer, guide, puller, cat's paw...
SANKYO SAW GUIDE with 12 pre-set angles HSG-10
516.00TL
Kataba saw HSG-10 guide with pre-set angles every 15 degrees :15-30-45-60-75-90-105-120-135-150-165-180 degrees.The guide has 2 magnets to guide your saw for an easier cutting control.Made by ABS.Weight : about 200 grams (The saw on the pictures is not included, but is available in my store)
Precision Zsaw guide + saw 265mm with slopes
1,998.00TL
Japanese Z-saw Zetsaw cutting guide for Kataba saw (blade thickness between 0,4 mm and 0,6 mm) + 1 saw 265 mm and 1 protractor included.You will be able to cut precision 90 degrees square cuts and miter cuts at any angle up to 45 degrees in both left and right directions as 45 degrees slopes in both directions.Long straight cuts are also possib...
SHINWA circular saw guide 300mm 78217
1,189.00TL
Shinwa 78217 circular saw guide 300 mmThe tool you need to make straight cuts at the right angle with your circular saw. With quick adjustment mechanism to set up 45 degrees, 90 degrees and 135 degrees.You can use it in the reverse way (see pictures)Size : 439 mm x 100 mm x 26 mmWeight : about 500 gramsMade of stainless steel, aluminum, brass, ...
SHINWA free angle circular saw guide 230mm 78176
673.00TL
Shinwa 78176 circular saw and jigsaw guide 230 mm.The tool you need to make straight cuts at the right angle with your circular saw.With a flat screw to secure the angle, so that your saw can easily pass over the guide.You can use it in the reverse way (see pictures) Size : 350 mm x 105 mm x 26 mmWeight : about 400 gramsMade of stainless stee...
Z-saw guide 45-90 degrees + 2 saws 265mm + 180mm
1,908.00TL
Japanese cutting saw guide Lifesaw Zsaw Zetsaw for Kataba saws (blade thickness 0,5 mm and 0,6mm) + 2 saws included : - 180 mm long, 0.5mm thick, kerf 0.66mm,pitch 1.4mm- 265 mm long, 0.6mm thick, kerf 0.92mm,pitch 1.75mmYou will be able to cut precision 45 and 90 degrees square cuts in both left and right directions as 45 degrees slopes in b...
