Chisels, marking and carving knives
Wood Carving marking Chisel knife Kiridashi
500.00TL
Japanese Kiridashi carpenter marking carving precision knife. Total length : 15,5 cm (6.1")Length of the blade : about 6 cm (2.4")Length of the cutting edge : 4 cm (1.6")Blade thickness : about 1,5 mmWeight : about 45 grams (including sheath)Blade : SK SteelHandle : WoodMade in Japan.
Marking gauge Kebiki with 2 blades
614.00TL
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
Wood Carving marking Kiridashi Chisel knife YOSHIHARU
341.00TL
Japanese Kiridashi YOSHIHARU carpenter marking carving precision knives. Available for right or left handed. Total length : 12,8 cm (5")Length of the blade : about 3,7 cm (1.46")Blade thickness : about 1 mmWeight : about 20 grams (including sheath)Blade : SteelHandle : BrassMade in Japan.
Hand-forged 15mm kensaki shirabiki Spear point marking knife
1,114.00TL
Japanese double edge "Ikeuchi Hamono" Hand-forged Kensaki shirabiki spear-point marking knife. Hand-forged by japanese master blacksmith Ikeuchi. Size : 15 mmLength of the blade : about 16 cmBlade thickness : about 2 mmWeight : about 50 grams Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes.For right- ...
Marking gauge small Kebiki with 2 blades
728.00TL
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
Hand-forged 15mm Kiridashi carving marking chisel
1,365.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 15 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 42 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Wood Carving marking Kiridashi Yoshiharu Chisel knife
341.00TL
Japanese Yoshiharu Kiridashi carpenter marking carving precision knives. Available for right or left handed. Total length : 16 cm (6.3")Length of the blade : about 6 cm (2.4")Length of the cutting edge : 4 cm (1.6")Blade thickness : about 2 mmWeight : about 56 grams (including sheath)Blade : Hard SteelHandle : Elastomer non slipSheath : ABS re...
Hand-forged 12mm Kiridashi carving marking chisel
1,365.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 12 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 34 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Hand-forged 9mm Kiridashi carving marking chisel
1,365.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 9 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 20 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Hand-forged 15mm short Kiridashi carving marking chisel
1,365.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 15 mm short modelLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 42 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Set of 5 hand-forged Kiridashi carving marking chisel
6,143.00TL
Set of 5 Kiridashi Kogatana Japanese Shōzō wood-bamboo chisels marking carving knives. Hand-forged by japanese blacksmith craftsman. Size : 9 mm, 12 mm long, 12 mm short, 15 mm long, 15 mm short Length of the blade : about 17 cmBlade thickness : about 2 mmWeight : between 20 and 40 grams Blade is made of blue steel Aogami II with hammer eyes....
Hand-forged 12mm short Kiridashi carving marking chisel
1,365.00TL
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 12 mm short modelLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 34 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
