Products
KIJIMA RYOBA thick saw 300mm
$62.200
High quality japanese thick KIJIMA Ryoba saw 300 mm Blade length : 300 mm (11.8") Overall length : 690 mm (27.2") Blade thickness at the neck : 1,35 mm Crosscut : 4 teeth/cm 10 teeth/inchRipcut : 2~3 teeth/cm 5~7.6 teeth/inch(Ripcut teeth are smaller close to the handle for an easier start)Weight : 230 grams Excellent durability. Can be r...
KIJIMA RYOBA thick spare blade 300mm
$45.600
High quality japanese thick KIJIMA Ryoba spare blade 300 mm Blade length : 300 mm (11.8")Blade thickness at the neck : 1,35 mm Crosscut : 4 teeth/cm 10 teeth/inchRipcut : 2~3 teeth/cm 5~7.6 teeth/inch(Ripcut teeth are smaller close to the handle for an easier start)Weight : 130 grams Excellent durability. Can be resharpened. This blade ca...
KING K-55 whetstone #1000
$14.800
KING K-55 HT-52 #1000 Japanese whetstone with a #1000 grit.Also included a waterstone nonslip base.Stone with a grit from #1000 to #3000 are considered as medium stones or the basic stones to start the sharpening process. Size : 185 mm x 62 mm x 15 mm (7.3" x 2.4" x 0.6")Weight : 430 gramsMade in Japan.
KING K-65 #800 whetstone
$17.200
KING K-65 #800 waterstone for sharpening knives, blades, chisels... Japanese whetstone with a #800 grit.It is a stone for coarse sharpening. Also included a waterstone nonslip base. Size : 185 mm x 63 mm x 20 mm (7.3" x 2.4" x 0.8")Weight : 580 gramsMade in Japan.
KING KDS Deluxe dual whetstone #1000 #6000
$35.600
KING KDS Deluxe combination stone. Double side whetstone with 2 different grits : #1000 + #6000 Size : 207 mm x 66 mm x 36 mm (8.1" x 2.6" x 1.4")Weight : 1000 grams It is a combination of the King Deluxe #1000 + King S1 #6000. The #1000 side is a little bit thicker than the #6000 side. This stone is suitable for knives up to Rockwell 62. Made ...
KING S-1 whetstone Super finish stone #6000
$29.600
Big KING Super finish stone with a #6000 grit. Perfect for finishing and polishing your blades. Size : 210 mm x 73 mm x 22 mm (8.3" x 2.9" x 0.9")Weight : 780 gramsAlso included a waterstone nonslip base.Made in Japan.
Knife set 4 KAI hammered Stainless steel IMAYO
$106.700
Kai Seki magoroku Set of 4 knives Serie IMAYO with a beautiful hammered pattern.Blade : Molybdenum Vanadium stainless steelBolster : Stainless steel Handle : Laminated reinforced woodChef's knife AB5460 AB-5460 :Length of the blade : 210 mm (8.3")Length of the handle : 120 mm (4.7")Weight : 170 grams Chef's knife AB5459 AB-5459 :Length of the...
Knife sharpener ceramic guide for waterstone
$6.500
Ceramic sharpening guide "Mont blanc". It will help you to keep your knife at exactly 15 degrees during the sharpening process on a whetstone. There is a piece of ceramic on each side wich will make your sharpening smooth and efficient.Length : 10 cm (3.9")Made in Japan.(Knife is not included)
KTC Auto punch UDP-4
$27.300
KTC Kyototool UDP-4 Auto punch. Single-handed punching without using a hammer. Works with materials like wood, plastic, metal, glass, and leather. Automatic center punches are important when it comes to marking an accurate drilling location. This one-hand-held puncher lets you mark drill holes anywhere while on the job, great to improve your pr...
Kugihiki saw 120mm for flush cutting
$27.300
This is an original small KUGIHIKI saw, used for small and precise work like building small furnitures, instruments....Very sharp Kugihiki saw for sawing off dowels. Blade is very flexible. Blade length : 120 mm (4.72")Blade : hardened steel SK-5Blade thickness : 0,4 mmOverall length : 320 mm (12.6")Teeth : 11/cmTeeth per inch : 26 Made ...
Marking gauge Kebiki with 2 blades
$17.200
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
Marking gauge small Kebiki with 2 blades
$19.000
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
